Satel INTEGRA Especificaciones descargar pdf (Pagina 5)

SATEL Installer Manual 3

1. GENERAL DESCRIPTION

• Dedicated modern microprocessor-based construction for protection of medium-to-big-size

facilities, with built-in GSM/GPRS industrial telephone and support for hardwired and

wireless devices.

• Two-way encrypted communication with ABAX system wireless devices on 868.0 MHz

- 868.6 MHz frequency band. The acknowledgement feature provided for all sent

transmissions, to ensure that the information gets through and to check devices for their

presence in the system. Parameter configuration and testing of the wireless devices

performed by radio, without removal of their cover.

• Firmware of the alarm control panel is stored in FLASH type non-volatile memory, so it can

be easily updated with no need for dismounting of the panel. It only requires connection of

the panel to the computer via RS-232 port and starting of the procedure of firmware

replacement.

• Saving the control panel settings to FLASH memory. These data will be retained even if

the RAM memory backup battery is disconnected.

• Execution of non-standard control functions, owing to the possibility of programming

complex logical operations on the outputs.

• System expansion by means of expansion modules. They not only increase the number of

available zones and outputs (both hardwired and wireless), but enhance the system with

new functional capabilities.

2. SYSTEM SPECIFICATIONS

• Capability to create up to 8 objects (subsystems).

• Optional subdivision of the system into 32 partitions (partition = group of zones).

• Partition status (armed/disarmed) can be controlled by user, timer or system zone.

Partition status can also be made dependent on the status of other partitions.

• Up to 128 programmable zones (hardwired and wireless) with support for NO, NC, EOL

and 2EOL configurations. One of several dozens of reaction types can be assigned for

each zone.

• Optional control of the zone status by using output, with no need for making physical

connection, which enables virtual zones and outputs to be used in the system.

• Up to 128 programmable outputs. One of over a hundred functions can be chosen for

execution.

• Up to 8 keypads or other devices can be connected to the keypad bus (CA-64 PTSA,

ETHM-1, INT-RS).

• Up to 32 expansion modules can be connected to the expander bus.

• 240 codes (passwords) for system users including a dozen of code types with the

possibility to define the system access authority level. Additionally, 8 administrator codes

and a service code are available.

• 64 system timers defined by the service, to enable armed mode control based on time

parameters. Additionally, partition timers (1 per each partition), programmed by authorized

users.

• Editable names of users and most of the security system components (partitions, zones,

outputs, modules, timers, etc.) to facilitate managements of the system.

• Variety of means for control panel programming:

– LCD keypad,

– computer with DLOADX program installed (locally through RS-232 port or remotely via

telephone links, and optionally – with ETHM-1 module connected – also through

Ethernet network, using TCP/IP protocol),

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comentarios a estos manuales

Sin comentarios

Satel INTEGRA Especificaciones Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Monóxido de carbono (co) detectores Satel INTEGRA