Satel INTEGRA Manual de usuario descargar pdf (Pagina 7)

INTEGRA SATEL

It is necessary to periodically carry out a functional test of the alarm system. Check that the

control panel responds to violation of individual detectors, that their fields of view are not

masked, that there is a reaction to opening protected windows, and that sirens and telephone

messaging work normally.

Detailed instructions on the system testing should be provided by the installer. It is

recommended that the installer carry out periodic maintenance of the alarm system, when

ordered by the user.

It is in the user's best interest to anticipate and plan beforehand appropriate procedures in

case the control panel signals an alarm condition. It is important that he should be able to

verify the alarm, determine its source on the basis of keypad information, and take

appropriate measures, e.g., to organize evacuation.

4. ALARM SYSTEM OPERATING COSTS

The main task of the control panel is signaling and efficient reporting of alarm situations and,

in the case of the monitoring function, providing the monitoring station with real-time

information about the protected facility status. Realization of these functions, based on the

use of telephone line, entails financial costs. Generally, the level of costs incurred by the

alarm system owner depends on the amount of information the control panel has to transfer

to the monitoring station. A failure of the telephone links, as well as incorrect programming of

the control panel, may to a large degree increase these costs. Such a situation is usually

related to an excessive number of connections made.

The installer can adjust functioning of the alarm system to the specific conditions and kind of

the protected site, however it is the user who should decide if his or her priority is transferring

information at any price, or, if some technical problems occur, the control panel is allowed to

skip some events, the reception of which has not been confirmed by the monitoring station.

5. INTEGRA CONTROL PANEL

The INTEGRA alarm control panel is designed for the security supervision in small, medium-

size and large facilities. The supervision is not limited to protection against burglary, but it

may also include monitoring of the facility for correct functioning for 24 hours a day.

The status of the alarm system is monitored on a continuous basis. Violation of any alarm

system component triggers the so-called tamper alarm. The control panel responds to signals

from individual detectors and decides whether to signal the alarm or not. Since various

detectors may be connected to the control panel, the type and way of alarming depends on

the way of control panel programming (the control panel may respond in one way to a signal

from fire detector and in another way to a signal from a water level detector).

The control panel makes it possible to group zones and detectors connected to them into so-

called partitions, and to freely determine which partition is to be supervised (armed).

Activation of any detector from such a group (hereinafter called “zone violation") may trigger

an alarm. A great advantage of the control panel is its high flexibility in determination which

partitions may be armed at the moment.

5.1 BASIC FUNCTIONS OF THE CONTROL PANEL

• signaling burglary, attack, fire, technical and auxiliary alarms,

• monitoring – communication with the monitoring stations (real time sending detailed

information on selected events in the protected facility),

• telephone messaging on alarms – either with the use of a voice message or to a pager,

1 2 3 4 5 6 7 8 9 10 11 12 ... 74 75

Comentarios a estos manuales

Sin comentarios

Satel INTEGRA Manual de usuario Pagina 7

Comentarios a estos manuales