Satel SATELLINE-EASy Guía de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
SATELLINE-EASy Pro
User Guide v.1.5
11
1 SATELLINE-EASy Pro technical specifications
SATELLINE-EASy Pro complies with the following international standards:
o EN 300 113-2 (RF-requirements)
o EN 301 489 (EMC-requirements)
o EN 60950 (Safety Standard)
o FCC CFR47 part 90
RECEIVER
TRANSMITTER
Note!
Frequency Range
403...473 MHz
Tuning Range
70 MHz
Channel Spacing
12.5 kHz / 20 kHz / 25 kHz
Programmable
Spurious Radiations
According to EN 55022 and FCC
CFR47 part 90
Duty Cycle 35W *)
100% (@22°C) 20 min
100% (@35 °C) 13 min
40% No limit
Duty Cycle 10W *)
100% (@22°C) No limit
100% (@35 °C) 50 min
40% No limit
Frequency Error
Tolerance
< 1 kHz
Sensitivity
FEC ON
See: Note 1
Co-channel Rejection
FEC ON
Adjacent Channel
Selectivity
FEC ON
Selectivity
FEC ON
Intermodulation
Attenuation
FEC ON
Blocking
FEC ON
Spurious Rejection
FEC ON
Power Consumption
120 W typical @ 35 W, min 12 Vdc
100 W typical @ 25W
Power Save Mode
Consumption
SLEEP State:0,4 W typical
Communication Mode
Half-Duplex
Type of Emission
F1D
Carrier power
10, 20, 25, 35 W / 50 ohm (default)
5, 10, 20, 25W / 50 ohm (Option **)
Adjacent Channel
Power
According to EN 55022 and FCC
CFR47 part 90
Carrier power stability
+ 2 dB / - 3 dB
*) If high output power is used continuously or with a high cycle, the equipment generates excess heat. The output
power is automatically decreased when necessary to prevent overheating. Typical operating times are shown in the
chart with different output powers and duty cycles @ 22°C and 35 °C (see chapter 3.2).
**) Limited output power is available as on order option
Note 1
Due to radio electronic design, the receiver is about 6 15 dB less sensitive on the following frequencies:
403.000, 416.000, 429.000, 442.000, 455.000, 468.000, 409.5875 and 469.200 MHz.
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 103 104

Comentarios a estos manuales

Sin comentarios