Satel SATELLINE-EASy Guía de usuario Pagina 1

SATELLINE-EASy Pro User Guide v.1.5 1 IMPORTANT NOTICE All rights to this manual are owned solely by SATEL OY (referred to in this user gui

SATELLINE-EASy Pro User Guide v.1.5 10 INTRODUCTION SATEL OY is a Finnish electronics and Telecommunications Company specialising in the de

SATELLINE-EASy Pro User Guide v.1.5 100 17 APPENDIX B 17.1 Functional delays Function Delay (ms) Wakeup time from STAND-BY to ON (controlle

SATELLINE-EASy Pro User Guide v.1.5 101 17.2.1 Transmission delays when the radio TX frequency is changed  If the modem’s transmitter fr

SATELLINE-EASy Pro User Guide v.1.5 102 Transmission delays with FEC-function (Forward Error Correction).

SATELLINE-EASy Pro User Guide v.1.5 103 17.2.3 Transmission delays using a 25 kHz radio channel Transmission delays without FEC-function (

SATELLINE-EASy Pro User Guide v.1.5 104 Transmission delays with FEC-function (Forward Error Correction).

SATELLINE-EASy Pro User Guide v.1.5 11 1 SATELLINE-EASy Pro technical specifications SATELLINE-EASy Pro complies with the following inter

SATELLINE-EASy Pro User Guide v.1.5 12 DATA MODEM Timing RS-232 Electrical Interface RS-232 Interface Connector 8-pin ODU Data speed

SATELLINE-EASy Pro User Guide v.1.5 13 1.1 Default settings SATELLINE-EASy Pro is shipped with the following default settings (un

SATELLINE-EASy Pro User Guide v.1.5 14 When creating a test connection, you can use Windows™ based SATEL Configuration Manager (available f

SATELLINE-EASy Pro User Guide v.1.5 15 2 OTHER FEATURES SATELLINE-EASy Pro radio modem fulfils the IP67 (NEMA 6) standard. With

SATELLINE-EASy Pro User Guide v.1.5 16 3 SATELLINE-EASy Pro SPECIAL FEATURES 3.1 Call Sign SATELLINE-EASy Pro has a CALL SIGN identifier

SATELLINE-EASy Pro User Guide v.1.5 17 The internal temperature is measured in the beginning of every transmission and at once when mo

SATELLINE-EASy Pro User Guide v.1.5 18 4 SERIAL INTERFACE The radio modem is referred to as DCE (Data Communication Equipment)

SATELLINE-EASy Pro User Guide v.1.5 19 5 USER INTERFACE 5.1 LED-indicators There are five (5) LED indicators on the front panel

SATELLINE-EASy Pro User Guide v.1.5 2 RESTRICTIONS ON USE SATELLINE-EASy Pro radio modems have been designed to operate on freque

SATELLINE-EASy Pro User Guide v.1.5 20 5.2.1 SATELLINE-EASy Pro LCD-display after power-up The display shows the basic information which i

SATELLINE-EASy Pro User Guide v.1.5 21 Display in Info mode. Pressing shows the next window. EASy-35W S/N: FW:06.18.3.52 Exit

SATELLINE-EASy Pro User Guide v.1.5 22 6 CONNECTION INTERFACES 6.1 RS-232 interface RS-232 standard defines the method of serial

SATELLINE-EASy Pro User Guide v.1.5 23 *) Programming Mode is for changing the settings of the radio modem via Programming menu. Normally th

SATELLINE-EASy Pro User Guide v.1.5 24 7 RF INTERFACE The SATELLINE-EASy Pro has a single TNC type RF-connector with impedance of 50 Ohm.

SATELLINE-EASy Pro User Guide v.1.5 25 7.2 Receiver The sensitivity of the receiver depends on the channel spacing of the radio modem (=da

SATELLINE-EASy Pro User Guide v.1.5 26 7.4 Forward Error Correction Forward Error Correction, FEC-function is switched ON (or OFF)

SATELLINE-EASy Pro User Guide v.1.5 27 When data flow on the TD line starts the frequency shifts from the receiving channel t

SATELLINE-EASy Pro User Guide v.1.5 28 7.8 User data whitening In some cases, if the user data includes a large number of cons

SATELLINE-EASy Pro User Guide v.1.5 29 7.9.2 Configuration in Programming menu The correct radio compatibility mode can be changed in the

SATELLINE-EASy Pro User Guide v.1.5 3 PRODUCT CONFORMITY SATEL Oy hereby declares that SATELLINE-EASy Pro radio modem is in compliance with

SATELLINE-EASy Pro User Guide v.1.5 30  FEC = ON (FEC OFF state supported in PCC Transparent FST protocol implementation)  Scrambling =

SATELLINE-EASy Pro User Guide v.1.5 31 Option 2 & 3: 9600bps@25kHz / [email protected] Option 1: [email protected] / [email protected] Radio

SATELLINE-EASy Pro User Guide v.1.5 32 7.9.5 Repeater function The implemented Pacific Crest/TRIMTALK modes support also the repeater fun

SATELLINE-EASy Pro User Guide v.1.5 33 The symbol rates for the Pacific Crest GMSK (Option2) are:  9600 bps on 25 kHz channel  4800 bps

SATELLINE-EASy Pro User Guide v.1.5 34 8 TRANSPARENT DATA TRANSMISSION 8.1 Serial interface, data format The SATELLINE-EASy Pro serial

SATELLINE-EASy Pro User Guide v.1.5 35 Handshaking is not needed if the system protocol is designed to prevent collisions (dat

SATELLINE-EASy Pro User Guide v.1.5 36 2) Data on channel CD will switch to active state only after recognition of a valid data transmission

SATELLINE-EASy Pro User Guide v.1.5 37 after all buffered data has been transmitted. When the serial interface speed is the same or slower t

SATELLINE-EASy Pro User Guide v.1.5 38 8.3.3 TX delay The radio modem can be configured to delay the beginning of a radio tra

SATELLINE-EASy Pro User Guide v.1.5 39 The strength of the received signal can be monitored using the LCD-display of the receiving radio mo

SATELLINE-EASy Pro User Guide v.1.5 4 WARRANTY AND SAFETY INSTRUCTIONS Read these safety instructions carefully before using the product:

SATELLINE-EASy Pro User Guide v.1.5 40 9 SETTINGS The configuration of SATELLINE-EASy Pro can be easily changed. Simply by connecti

SATELLINE-EASy Pro User Guide v.1.5 41  Connect MODE-pin to ground (if using the NARS-1F adapter, slide the switch downwards),

SATELLINE-EASy Pro User Guide v.1.5 42 Restore factory settings ------------------------ Do you want to restore factory settings? (Y/N)&g

SATELLINE-EASy Pro User Guide v.1.5 43 Enter selection or ESC to previous menu >1 Radio TX and RX frequency setup ----------------------

SATELLINE-EASy Pro User Guide v.1.5 44 Enter selection >1 Radio frequency setup --------------------- 1) Radio frequency 2) Channe

SATELLINE-EASy Pro User Guide v.1.5 45 1) 12,5 kHz 2) 20 kHz 3) 25 kHz Enter selection or ESC to previous

SATELLINE-EASy Pro User Guide v.1.5 46 The maximum useable sensitivity of the receiver is determined by the channel spacing (=r

SATELLINE-EASy Pro User Guide v.1.5 47 The hardware information can be seen in the main menu ***** SATELLINE ***** FW:

SATELLINE-EASy Pro User Guide v.1.5 48 The new value is displayed in the menu. To get back to the main menu press ESC (and then E for Exiti

SATELLINE-EASy Pro User Guide v.1.5 49 3) 9 bit data Enter selection or ESC to previous menu >1 Serial port 1 Settings ---------

SATELLINE-EASy Pro User Guide v.1.5 5 TABLE OF CONTENTS IMPORTANT NOTICE ...

SATELLINE-EASy Pro User Guide v.1.5 50 Now all of the modifications of the example have been performed and the new values are

SATELLINE-EASy Pro User Guide v.1.5 51 Number 6 is pressed in the Main menu. Serial ports 1 and 2 Handshaking -----------------------------

SATELLINE-EASy Pro User Guide v.1.5 52 Now all of the modifications of the example have been performed and the new values are

SATELLINE-EASy Pro User Guide v.1.5 53 9.2.12 Modification of routing Configuration settings defining routing can be changed by selecting

SATELLINE-EASy Pro User Guide v.1.5 54 User defined address position setup ----------------------------------- 1) Start position 01 2)

SATELLINE-EASy Pro User Guide v.1.5 55 Following this, a new address will be modified (”0009”  ”0002”) and a new Network ID

SATELLINE-EASy Pro User Guide v.1.5 56 Routing Setup ------------- 1) Mode Virtual routing 2) Protocol Userdefined 0

SATELLINE-EASy Pro User Guide v.1.5 57 9.2.13 Activating tests Tests can be activated by selecting main menu selection ”9”. Tests

SATELLINE-EASy Pro User Guide v.1.5 58 9.2.16 Saving modified settings into the permanent memory All modified settings must be saved into

SATELLINE-EASy Pro User Guide v.1.5 59 value have been edited. Toggle-type parameters (typically with ON/OFF choices modifications

SATELLINE-EASy Pro User Guide v.1.5 6 7.1 Transmitter ...

SATELLINE-EASy Pro User Guide v.1.5 60 TX & RX freq: changes both TX and RX frequencies at the same time. TX freq: changes only the T

SATELLINE-EASy Pro User Guide v.1.5 61 9.3.2 CHECKING/CHANGING THE REFERENCE FREQUENCY Press SETUP, set cursor at the Radio frequency and

SATELLINE-EASy Pro User Guide v.1.5 62 The display will now show New Ref freq 438.00000 MHz The cursor > will now blink under the fir

SATELLINE-EASy Pro User Guide v.1.5 63 MODIFYING RECEIVER SENSITIVITY: The displayed list consists off all possible values of receiver sensi

SATELLINE-EASy Pro User Guide v.1.5 64 The display will show the current value. Press ▲ or ▼ until the cursor > points to the desired va

SATELLINE-EASy Pro User Guide v.1.5 65 9.3.5 Changing serial port settings (Port 1) Press ▲ or ▼ until the cursor > points to the desi

SATELLINE-EASy Pro User Guide v.1.5 66 MODIFICATION OF THE NUMBER OF STOP BITS: Press ▲ or ▼ until the cursor > points to the desired num

SATELLINE-EASy Pro User Guide v.1.5 67 9.3.7 Selecting special functions Press ▲ ▼ until the cursor > points to “Additional” selection

SATELLINE-EASy Pro User Guide v.1.5 68 9.3.9 Restoring factory settings Press ▲ or ▼ to move cursor > to point to “Factory set-up” sele

SATELLINE-EASy Pro User Guide v.1.5 69 9.3.11 Saving modified values into the internal memory After all desired modifications have been pe

SATELLINE-EASy Pro User Guide v.1.5 7 9.2.3 Changing frequency (active radio channel frequency) ...

SATELLINE-EASy Pro User Guide v.1.5 70 In case you need more information on the time delays related to the use of SL-commands, please contac

SATELLINE-EASy Pro User Guide v.1.5 71 9.4.2 Addressing xxxx = address in hexadecimal format (0000 … FFFF) Command Effect and description

SATELLINE-EASy Pro User Guide v.1.5 72 9.4.4 Other functions Command Effect and description of command SL**> Set current settings as pe

SATELLINE-EASy Pro User Guide v.1.5 73 10 REPEATER MODE AND ADDRESSING Repeaters and addressing may be used to extend the coverage area of

SATELLINE-EASy Pro User Guide v.1.5 74 10.2 Addressing Addresses can be used to route a data message to the desired destination

SATELLINE-EASy Pro User Guide v.1.5 75 Transmission: Transmission address has been set OFF. Radio modem will transmit the data pac

SATELLINE-EASy Pro User Guide v.1.5 76 Reception addressing has been set OFF. The radio modem will transfer all received data to

SATELLINE-EASy Pro User Guide v.1.5 77 For example, if the substation terminal devices are not able to check and form addresse

SATELLINE-EASy Pro User Guide v.1.5 78 S ADD DATA - The above is the same message after being relayed from the last repeater in the ch

SATELLINE-EASy Pro User Guide v.1.5 79 10.3.3 Repeater chain using dual addressing If the terminal devices cannot add address chains to th

SATELLINE-EASy Pro User Guide v.1.5 8 11.1 Introduction to Message Routing ... 80 11.

SATELLINE-EASy Pro User Guide v.1.5 80 11 MESSAGE ROUTING 11.1 Introduction to Message Routing Message Routing is an exciting feature in S

SATELLINE-EASy Pro User Guide v.1.5 81 11.1.1 Features of Message Routing The Message Routing feature of the SATELLINE-EASy Pro is design

SATELLINE-EASy Pro User Guide v.1.5 82 3. Configure the radio modems accordingly. There are two ways to configure the parameter

SATELLINE-EASy Pro User Guide v.1.5 83 several overlapping networks. The operation of the Message Routing must be clearly understood before

SATELLINE-EASy Pro User Guide v.1.5 84 11.2 Operating modes of Message Routing The Message Routing has two different operating modes:  So

SATELLINE-EASy Pro User Guide v.1.5 85 0132XYZJärjestelmä ModeemiY 1, 2Z 1, 311.3 Detailed description of Message Routing 11.3.1 Source Mo

SATELLINE-EASy Pro User Guide v.1.5 86 11.3.3 Overhop function in Source Mode Routing M a s t e r T DR a d ioS u b s t a t io n R DMR1

SATELLINE-EASy Pro User Guide v.1.5 87 The overhop function allows for the use of mobile substations. In the example above, a mobile substat

SATELLINE-EASy Pro User Guide v.1.5 88 12 INSTALLATION 12.1 Installation of a Radio Data Modem The radio modem should be installed wi

SATELLINE-EASy Pro User Guide v.1.5 89 12.1.2 Fuse A proper fuse must be connected in between the radio modem and the power supply. The c

SATELLINE-EASy Pro User Guide v.1.5 9 17 APPENDIX B ... 1

SATELLINE-EASy Pro User Guide v.1.5 90 12.2 Antenna installation 12.2.1 Mobile equipment  ¼-wave antenna  ½-wave antenna The ideal i

SATELLINE-EASy Pro User Guide v.1.5 91 withstand all foreseeable weather conditions (frost, excess sun, direct UV-radiation, seawater etc.).

SATELLINE-EASy Pro User Guide v.1.5 92 positive result of the quality of the connection. Thus the height of the antennas and topographical o

SATELLINE-EASy Pro User Guide v.1.5 93 Example of an antenna installation: by using amplifying antennas (G=Gain) and by installing the anten

SATELLINE-EASy Pro User Guide v.1.5 94 13 DESIGNING SYSTEMS 13.1 Factors affecting the quality and distance of the radio connection  p

SATELLINE-EASy Pro User Guide v.1.5 95 13.2 Radio field strength Radio signal strength must be good enough for successful data transfer. W

SATELLINE-EASy Pro User Guide v.1.5 96 14 CHECK LIST The following points must be taken into account when installing and configuring a radi

SATELLINE-EASy Pro User Guide v.1.5 97 15 ACCESSORIES 15.1 RS-232 cables and adapters Type Description ODU/D9f 8 pin ODU / D9 female (unive

SATELLINE-EASy Pro User Guide v.1.5 98 15.4 Antennas Type Description CA420O CA450O Omnidirectional coaxial dipole, 2 dBi, 405-440 MHz Omni

SATELLINE-EASy Pro User Guide v.1.5 99 16 APPENDIX A ASCII CHARACTER TABLE D H A D H A D H A D H A D H A D H A 0 0 NUL 43 2B + 86