Satel INTEGRA Plus Especificaciones descargar pdf (Pagina 8)

6 ETHM-1 Plus SATEL

6 Configuring

The module can be configured via the control panel, using a keypad or a computer with

DLOADX program installed on it.

6.1 Module parameters and options

6.1.1 Module connected to INTEGRA / INTEGRA Plus control panel

You can configure parameters and options of the module using:

 LCD keypad: SERVICE MODE STRUCTURE HARDWARE LCD KEYPADS SETTINGS

[module name],

 DLOADX program: "Structure" window "Hardware" tab "Keypads" branch [module

name]  "ETHM-1" tab (Fig. 5).

Shown in s

quare brackets are the names of parameters and options as they are presented

on the LCD keypad display.

Name – individual name of the device (up to 16 characters).

Tamper signaled in part. [Tamper in part.] – partition where alarm will be triggered in the

event of module tamper.

Obtain IP address automatically (DHCP) [DHCP] – if this option is enabled, the module will

automatically download data on IP address, subnet mask and gateway from the DHCP

server (in such a case, you do not have to program these parameters).

The IP address assigned to the module can be read:

 in the keypad: using the IP/MAC ETHM-1 user function available in the TESTS

submenu. For a detailed description of the function please refer to the user manual

for the control panel.

 in the DLOADX program: below the module parameters and options (Fig. 5).

IP address – module IP address.

Subnet mask [Netmask] – the mask of the subnet in which the module is working.

Gateway – IP address of the network device through which the other devices in the local

network can communicate with devices in other networks.

Obtain DNS server address automatically [DHCP-DNS] – if this option is enabled, the

DNS server IP address is downloaded automatically from the DHCP server. The option is

available, when the O

BTAIN IP ADDRESS AUTOMATICALLY (DHCP) option is enabled.

DNS server – IP address of the DNS server which is to be used by the module. It can be

programmed, if the OBTAIN DNS SERVER ADDRESS AUTOMATICALLY option is disabled.

DloadX

DloadX->ETHM-1 connection [Connect DloadX] – if this option is enabled, it is possible to

initiate connection with the control panel via Ethernet from the DLOADX program.

Port [Port (DloadX)] – number of the TCP port used for communication with the DLOADX

program. You can enter values from 1 to 65535. The value must be different from that

entered for the other ports. Default value: 7090.

DloadX key [Key (DloadX)] – a string of up to 12 alphanumeric characters (digits, letters and

special characters) defining the key for data encryption during communication with the

DLOADX program.

DLOADX server [DloadX IP] – address of the computer running the DLOADX program. If the

computer is not in the same local network, it must be a public address. You can enter

either the IP address or the domain name.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Comentarios a estos manuales

Sin comentarios

Satel INTEGRA Plus Especificaciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Satel INTEGRA Plus