Satel CA-10 Manual de usuario descargar pdf (Pagina 5)

CA-10 SATEL

 answering phone calls and informing the user of the system status (whether there

was an alarm condition since last arming),

 MONITORING - communication with telephone monitoring stations (real-time

transmission of detailed information about selected events in the protected facility),

 printing current information about all the system events on an external printer.

Features of CA-10:

 panel operation controlled with remote keypads,

 remote control by means of a telephone set (selected functions) - interfacing with

the MST-1 module,

 real-time status display for armed zones,

 viewing alarm condition and trouble logs available (for up to 255 events),

 option to subdivide the alarm system into 4 partitions (subsystems),

 any partition can be operated by up to 13 users with independent access codes

(up to 32 access codes) - the access codes can have different authority level, any

instance of using them is recorded in the event log,

 remote control of locks, lighting system and other devices from the panel keypads,

 activation of PANIC, FIRE and AUXILIARY alarms from the keypads,

 various system arming options (with automatic bypassing, with no-exit bypassing),

 internal clock capable of automatic arming and disarming of the system,

 automatic diagnostics of the basic components of the alarm system.

Armed Modes

To adapt the alarm system to various needs, the CA-10 control panel offers several

armed modes:

Full armed mode

The mode in which detectors connected to the panel control the protected facility and

violation of the protected zones is signaled by the panel with all available means (sirens,

reporting to telephone monitoring stations, telephone messages).

Silent armed mode

Armed mode in which alarms are signaled only in the panel keypads. The installer can

decide which of the detectors are to be automatically bypassed on activating this mode;

he can also choose signaling device to be used in that mode.

Partially armed mode

The installer can determine the detectors in the system which will be excluded from the

supervision when the system is armed with a special access code (authority level 7).

The user can, by entering an appropriate code, arm the system in a chosen part of the

facility only.

Stay armed mode

In this mode the panel enables automatic bypassing of chosen detectors if after arming

the user did not leave the supervised area and did not violate the entry/exit zone.

http://www.ealarm.com.my

1 2 3 4 5 6 7 8 9 10 ... 22 23

Sin comentarios

Satel CA-10 Manual de usuario Pagina 5