SATEL INT-KSG 5
If the user can only arm one partition, the arming procedure will be initiated as soon as
the code is entered and confirmed with the key.
2.2 Full arming the specific partitions
1. Enter the code and confirm using .
2. Using the key, scroll through the menu until you find the
A
RM
function. Having selected the function, touch the or
key to start it.
3. The partitions that can be armed will be presented on the display by means of a number
corresponding to the partition number. Shown at the display bottom is the name of
partition currently indicated by the cursor. Using the arrow keys, move the cursor over the
number of partition which is to be armed.
4. Touch any number key to select a partition (the partition number will be presented in
negative). Touch the keys three times within 3 seconds: 0 – to deselect all partitions, 1 –
to select all partitions, and 2 – to invert your selection.
5. Having selected the partitions to be armed (all must be displayed in negative), touch the
or key.
You can also arm the selected partitions by using the A
RM SELECTED
function, after entering
the code and the or key, but only when none of the partitions available to the user is
armed and the keypad is not signaling any alarm.
2.3 Arming in the selected mode
1. Enter the code and confirm using .
2. Using the key, scroll through the menu until the A
RMING
MODE
is found. Having selected the function, touch the or
key to start it.
3. Using the
and keys, select the arming mode.
4. Confirm your selection using
or . You will be brought
back to the user menu, and the A
RM
function will be
displayed as the selected one.
5. Touch the
or key. Proceed in the same way as when
full arming the specific partitions (steps 3-5).
2.4 Quick arming
If your installer has enabled the Quick Arm feature in the keypad, you will be able to arm the
system without using the code. The installer indicated partitions will be armed.
1. Specify the arming mode (touch one of the keys: 0 – fully arming; 1 – fully arming +
bypasses; 2 – arming without interior; 3 – arming without interior and without entry delay).
2. Touch the or key.
2.5 Denial of arming
The installer can program the control panel so that the arming procedure could not be
started, if:
a zone is violated in the partition;
(13 paginas)
(16 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales